端子压接钳

>> 我要留言

>> 联系我们

公司主要经营网络剥线钳，多功能网络水晶头压接钳，多功能防水接头压接钳，端子板压线器，端子压接钳，测线仪，迷你电子钳，电工钳，电缆切割钳，焊助工具，电烙铁，焊台，吸锡泵，热风机，抗静电镊子，组合螺丝批，电动螺丝批，工具箱，组合工具包等。

关键词：

网络工具

测线仪

产品详细

Crimping Tool Kit

- Crimping tool kit with changeable dies for processing almost all crimping parts
- Parallel crimping performance saves more strength
- Important---it could reduce nearly 30% power to crimp the terminal plug
- Additional cancel button – could return to original statement if you want to cancel the operate
- Handle design— humanization design is more popular by customer

Crimping Dies For HY-2528
		Dies Mandrel Shape for crimping of noninsulated ring- and fork terminals, pin-terminals and connectors 05-10m2
		Dies For Insulated Terminals for crimping of insulated ring- and fork terminals, pin-terminals,connectors etc. von 05-6mm², contact- and insulation-crimp in one step for crimping of insulated ring- and fork-terminals,pin-terminals 10-16mm²
		Dies For Heat Shrinkable Butt Splice Connetors for crimping of heat shrinkable butt splice connectors(Product WEITKOWITZ) with cross section 0.14-6 mm²
		Dies For Noninsulated Open Barrel Terminals for crimping of noninsulated open barrel male and fernale terminals with cross section 0.1-2.5mm²and tab width 2.8 and 4.8mm; contact and insulation crimp in one step
		Dies For Noninsulated Open Barrel Terminals for crimping of noninsulated open barrel male and fernale terminals with cross section 0.5-6mm² and tab width 4.8 and 6.3mm; contact and insulation crimp in one step
		Dies For Modular Plugs for crimping of modular plugs 0.5-2.5mm²; contact and insulation crimp in one step
		Dies For Rolled Contacts for crimping of rolled contacts 0.14-1.5mm²; contact and insulation crimp in one step
		Dies For D-sub-connectors for crimping of D-sub-connectors 0.08 bis 0.56 mm²; contact and insulation crimp in one step
		Dies For Turned Contacts for crimping of turned contacts (multipin plug connections) plug-in-Ø1.6mm, 2.4mm and 2.5mm, cross-section 0.14-4.0mm²
		Dies For Turned Contacts for crimping of turned contacts (multipin plug connections) plug-in-Ø1.6mm, 2.4mm and 2.5mm, cross-section 1.5-6.0mm²
		Dies, Trapezoid-shape for crimping insulated and noninsulated cord-end sleeves 0.5-6mm² for crimping insulated and noninsulated cord-end sleeves 10-25mm²
		Dies, Hexagonal-shape for crimping coax-connectors RG 58, RG 59, RG 62 and RG 71 for crimping coax-connectors RG58 and RG 174